Buyer tool

Match a container to a published Tongda family

Tongda’s published range runs from 10 mL bottles to the 3,000 L TDBS-3000A storage tank. More than 10,000 machines have been supplied to 100+ countries. This table uses the maximum container volume and the HDPE extruder output already printed on each model page. Extruder kg/h is not containers per hour. Accepted pieces per hour are confirmed case by case on your drawing. See real output versus the model name.

The controls narrow the table when JavaScript is available. Without JavaScript, the table below stays complete.

The table lists all 29 published models. Filters narrow it when JavaScript is available.

Published maximum container volume, model family and product page
FamilyModelPublished maximumStationsDriveHDPE extruder outputLayersListed for
Up to 500 mL
3 L multi-head3 L multi-head30 mL–500 mL (page text)Single or double station, four or six heads (page text)Hydraulic system (stated on the page)Not published as textNot statedMilk and juice bottles
2 L
HTS IIHTS II-2L2 LDouble stationHydraulic (hydraulic series page)60 kg/hHTS series page: die can have 1–4 layers. Confirm on the model.Daily chemical and milk bottles
5 L
HTS IIHTS II-5L5 LDouble stationHydraulic (hydraulic series page)110 kg/hHTS series page: die can have 1–4 layers. Confirm on the model.Detergent bottles, 5 L jerry cans
HS IIHS II-5L5 LDouble stationServo (servo series page)110 kg/hNot stated on the model specificationDetergent bottles, 5 L jerry cans
HSEHSE-5L5 LSingle stationFully electric (fully electric series page)85 kg/hNot stated on the model specificationMedical, food and cosmetic bottles
HSE IIHSE II-5L5 LDouble stationFully electric (fully electric series page)130 kg/hNot stated on the model specificationBottle production
Bottles under 1 L
HTS IIHTS II-8LSpecification maximum 8 L. Used mainly for 6-head and 8-head bottles under 1 L.Double stationHydraulic (hydraulic series page)220 kg/hHTS series page: die can have 1–4 layers. Confirm on the model.Small bottles under 1 L, 6-head or 8-head. Not a jerry-can machine.
10 L
TDBTDB-10F10 LSingle station (hydraulic series page)Hydraulic (hydraulic series page)85 kg/hNot stated on the model specificationContainers and technical parts
12 L
HTS IIHTS II-12L12 LDouble stationHydraulic (hydraulic series page)130 kg/hHTS series page: die can have 1–4 layers. Confirm on the model.Jerry cans; daily-chemical page also lists 5–12 L
HSHS-12L12 LSingle stationHydraulic series page; model page says hydraulic servo110 kg/hView-strip option named. Layer count not stated.Jerry cans, chemical containers
HS IIHS II-12L12 LDouble stationServo (servo series page)160 kg/hModel page: can equip multiple layers. Count confirmed on the quotation.Jerry cans. Double die up to 5 L; single die up to 12 L.
HSEHSE-12L12 L specification. Page text also says 10 mL–50 L.Single stationFully electric (fully electric series page)110 kg/hNot stated on the model specificationCleanroom containers. Matched here to the 12 L specification.
HSE IIHSE II-12L12 LDouble station (fully electric series page)Fully electric (fully electric series page)200 kg/hNot stated on the model specificationJerry cans and chemical containers; daily-chemical page lists 5–12 L
15–20 L
HS IIHSII-20L15–20 LDouble station (servo series page)Servo (servo series page)110 kg/hNot stated on the model specificationContainers of 15–20 L
25 L
TDBTDB-25A25 L (TDB-25F page)Single stationHydraulic (hydraulic series page)110 kg/hNot stated on the model specificationJerry cans, stackable buckets. Also linked from the 5-gallon page.
30 L
HSHS-30L30 L (page also says 5–30 L)Single station (hydraulic series page)Hydraulic series page; model page says hydraulic servo300 kg/hView-strip option named. Layer count not stated.Chemical drums, jerry cans. Also linked from the 5-gallon page.
HS IIHS II-30L30 LDouble station (servo series page)Servo (servo series page)300 kg/hNot stated on the model specificationChemical drums, stackable buckets. Also linked from the 5-gallon page.
HSEHSE-30L30 LSingle station (fully electric series page)Fully electric (fully electric series page)200 kg/hNot stated on the model specificationClean-grade containers. Also linked from the 5-gallon page.
50 L
TDBTDB-50A50 L (TDB-50F page)Single stationServo (servo series page)130 kg/hNot stated on the model specificationJerry cans and chemical drums
120 L
TDBTDB-120A120 L (TDB-120F page)Single stationServo (servo series page)160 kg/hNot stated on the model specificationOpen-top and closed drums
160 L
TDBTDB-160DF/2PUp to 160 LNot stated as a station countHydraulic servo (stated on the model page)Not published as textMultiple screws for multilayer products. Layer count not stated.160 L class containers
160–250 L
TDBTDB-250F250 L. Page text: 160–250 L chemical barrels.Single station (servo series page)Servo (servo series page). Page also says hydraulic servo is optional.360 kg/hNot stated on the model specificationChemical barrels, 160–250 L
350 L
TDWTDW-350F350 LSingle station (servo series page)Servo (servo series page)380 kg/hNot stated on the model specificationLarge drums and tanks
1,000 L
TDBXTDBX-1000A1,000 LSingle station (other-series page)Not stated on the hydraulic, servo or fully electric series pages420 kg/hNot stated on the model specificationLarge containers. Listed for IBC and water-tank pages.
1,200 L
TDBTDB-1200A-P1,200 L (TDB-1200F/P page)Single station (servo series page)Servo (servo series page)720 kg/h on this page. Tongda states TDB-1200 HDPE output as 720–750 kg/h.2 layers (model specification)IBC tanks and other large industrial containers, including water tanks
TDBTDB-1200A-P31,200 LNot stated on the model specificationHydraulic pump drive power is listed. Not on the servo series page.750 kg/h on this page. Tongda states TDB-1200 HDPE output as 720–750 kg/h.3 layers (model specification)IBC inner bottles and other large industrial containers
1,500 L
TDBXTDBX-1500A1,500 L (TDBX-1500A page)Single stationServo motor (other-series page)450 kg/hSingle layer (other-series page)IBC tanks, water tanks and other large industrial containers
2,000 L
TDBSTDBS-2000A2,000 L storage tankSingle stationHydraulic pump drive power is listed on the model page450 kg/hNot stated on the model specificationWater and storage tanks. Not an IBC model.
3,000 L
TDBSTDBS-3000A3,000 L storage tankSingle stationHydraulic pump drive power is listed on the model page220 × 3 kg/hNot stated on the model specificationStorage tanks. This is not an IBC machine.

How a row was included

  • Maximum volume and extruder kg/h come from that model’s specification table. Where a derived page description disagrees with the specification table, the table on this page follows the specification.
  • The HTS II-2L specification is 2 L. The same page also contains the wording 10 mL–20 L. Rows for that model use 2 L.
  • The HSE-12L specification is 12 L. The same page also describes 10 mL–50 L cleanroom containers. Rows for that model use 12 L.
  • HSE-5L is listed at 85 kg/h and HSE II-5L at 130 kg/h, from their specification tables. A derived description or the small-machine summary prints a different extruder figure for those two models.
  • TDB-250F is listed at 360 kg/h, from its specification table. The HDPE model table uses the same 360 kg/h. The derived page description prints a different figure.
  • TDB-1200A-P is 720 kg/h and 2 layers. TDB-1200A-P3 is 750 kg/h and 3 layers. Tongda states TDB-1200 HDPE output as 720–750 kg/h. The TDBS-3000A figure is printed as 220 × 3 kg/h and is not added together here.
  • TDB-160DF/2P is a 160 L class machine. It does not publish extruder kg/h as text. The 3 L page states 30 mL–500 mL bottles. TDB-25APC is named on the 5-gallon page and has no model page in this catalogue.
  • HTS II-8L has a specification maximum of 8 L and an extruder output of 220 kg/h. Tongda uses it mainly as a 6-head or 8-head machine for bottles under 1 L. It is not the jerry-can model in the 8 L class.
  • The TDBS-3000A is a storage tank, not an IBC. A dry cycle on a model page is not a production rate and is not used as a filter.

Send the drawing on the contact page

Include the container drawing, resin, target weight and the pieces per hour you need. There is no public price list on this page.

By Suzhou Tongda Machinery

Published 2 min read

The selector above is the full published list. It stays readable with JavaScript turned off. JavaScript only hides rows that do not match the container, volume, layer note, extruder-output band or drive you choose.

Tongda builds extrusion blow molding machines for HDPE and PP containers. The company range published on this site runs from 10 mL to 3,000 L. The 3,000 L machine is the TDBS-3000A storage tank. It is not an IBC. More than 10,000 machines have been supplied to 100+ countries.

A model name follows the maximum container volume. It is not a promise of containers per hour. Ask for extruder kilograms per hour, the dry-cycle time and accepted pieces per hour on your mold. This page does not turn a dry cycle into a production rate. Start from real output versus the model name when the number you need is pieces per hour.

Questions

Does the selector quote containers per hour?

No. Kilograms per hour in the table are HDPE extruder output from the model specification. Accepted pieces per hour depend on the container, the mold and the machine configuration, and they are confirmed case by case. A dry cycle is not a production rate. See real output versus the model name.

What container sizes does the selector cover?

The published company range is 10 mL to 3,000 L. The table lists model families whose specification pages state a maximum, from the HTS II-2L at 2 L through the TDBS-3000A storage tank at 3,000 L. The 3 L multi-head page states 30 mL–500 mL bottles in text. The TDBS-3000A is a storage tank, not an IBC.

How do fully electric, hydraulic and servo models differ in this list?

Fully electric models are the HSE and HSE II machines on the fully electric page. Hydraulic models are the machines on the hydraulic page, plus the 3 L page, which states a hydraulic system. Servo models are the machines on the servo page. HS-12L and HS-30L are on the hydraulic page, and their own pages also say hydraulic servo, so both filters keep them. TDBX-1000A does not state a drive on those series pages.

Which published pages state a layer count?

The TDB-1200A-P specification states 2 layers and 720 kg/h. The TDB-1200A-P3 specification states 3 layers and 750 kg/h. Tongda states TDB-1200 HDPE output as 720–750 kg/h. The other-series page describes TDBX-1500A as single layer. HS II-12L says a multilayer head can be fitted. The HTS series page says the die can have 1–4 layers. Those options are confirmed on the quotation. They are not a layer count in the model specification.

Where do I ask Tongda to confirm a machine?

Send the container drawing, resin, target weight and the pieces per hour you need through the contact page. There is no public price list. Accepted output is confirmed case by case.

Send the container drawing

Tell us the resin, target weight and the pieces per hour you need. Accepted output is confirmed case by case.

Contact Tongda

Looking for a machine? Browse blow molding machines by container size, or read more guides on the blow molding blog.

Contact Tongda