This machine can help you to make the Max. Volume as 160Liter in the jerrycan/drums. It’s widely used to make 80L~160L jerrycan. This machine is with 18L accumulator type in the die head, 100 point parison controller, bottom blowing device and take-out device. The Max.weight of the plastic jerrycan can be 7.5~8.5KGS. You can have the options in the servo motor in the hydraulic system, Tie-bar less in the clamping platen. We can make the most suitable configuration according to your requirement in you new project.

Video & Parameters

  Specification Station   Single
Max.product volume L 160
Dry cycle pc/h 120
Output of HDPE kg/h 230
Weight of machine kg 22000
Size of machine(L*W*H) m 6.7*2.9*4.7
    Die head Max.die diameter mm 700
Die head heating zone   6
Capacity of accumulator head L 28
Die head heating kw 51.5
  Clamping Unit Platen distance mm 800~1800
Clamping force kn 740
    Extruder Unit Screw diametre mm 120
Screw length/diametre ratio   28
Screw heating power kw 32
No.of heating zone   5
  Power Unit Hydraulic pump driving power kw 42.5
Screw motor power kw 90
Total power kw 216
      Remarks Air consumption m³/min 1.6
Blow pressure Mpa 0.6
Cooling water pressure Mpa 0.3
Water consumption L/min 180
Max size of mold(W*H) mm 1000*1900